1998 Ford Mustang Transmission Clutch Kit Parts

Choose your Submodel for your 1998 Ford Mustang

GT SVT Cobra

Showing 1 - 10 of 15 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1998 Ford Mustang Transmission Clutch Kit 8 Cyl 4.6L Ram

Replacement clutch set
10.5 x 1 1/16-10 Spline
HDX clutch set HD 4.6L/5.0L 1986-00 Ford Mustang 10.5 Diaphragm 1 1/16-10
HDX Clutch Set
Features:
- Built With 30 Percent More Clamp Pressure Than Stock
- Smooth
- Chatter Free Operation
- Premium Organic Composite Disc Friction Material
- Exclusive 8-Spring Hub Assembly Where Applicable
- Great Drivability
- Use For Power Levels To 450 HP
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
The basic RAM concept of clutch performance is simple: Increased clamp pressure is the single most effective way to manage high horsepower or load, especially in street driven performance cars. We purpose build RAM HDX pressure plates with 30% more clamp pressure than stock. The second important feature is smooth, chatter free operation, which we achieve with premium organic composite disc friction material. Also, HDX discs feature our exclusive 8-spring hub assembly for added load capacity. HDX. Great driveability and control for power levels to 450 horsepower. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
1998 - Ford Mustang	V	-	8 Cyl 4.6L	GT	281

2 In Stock

$412.22 CAD

$494.66 CAD

Brand	Ram
Part #	R3688794HD
Condition	New
Warehouse	B

1998 Ford Mustang Transmission Clutch Kit Valeo

1998 Ford Mustang Transmission Clutch Kit Valeo

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
OE Replacement

Additional Fitment Information:

Vehicle	Sub Model
1998 - Ford Mustang	GT

Brand	Valeo
Part #	VAL2078505
Condition	New
Warehouse	A

1998 Ford Mustang Transmission Clutch Kit 8 Cyl 4.6L Centerforce

Dual Friction(R); Clutch Kit
10.4 in. Dia.; 7 Bolt Pattern; 10 Spline; 1 1/16 in. Input Shaft; 588 ft/lbs Torque; Includes Pressure Plate/Clutch Disc/Throw Out Bearing/Alignment Tool
The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
Dual Friction Clutch Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
Features:
- Patented Centrifugal Weight Design [where Applicable]
- Patented Dual Friction[r] Design
- Patented Ball Bearing Pressure Plate [where Applicable]
- Light Pedal Effort
- High Quality Friction Material
- Increased Holding Capacity
- Smooth Engagement
The Centerforce(R) Dual Friction(R) Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides. The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
1998 - Ford Mustang	V	-	8 Cyl 4.6L	SVT Cobra	281

1 In Stock

$918.35 CAD

$1,102.02 CAD

Brand	Centerforce
Part #	C78KDF214814
Condition	New
Warehouse	B

1998 Ford Mustang Transmission Clutch Kit LuK

1998 Ford Mustang Transmission Clutch Kit LuK

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
OE Replacement

Additional Fitment Information:

Vehicle	Sub Model
1998 - Ford Mustang	SVT Cobra

1 In Stock

$291.79 CAD

$350.15 CAD

Brand	LuK
Part #	LUK2203371
Condition	New
Warehouse	A

1998 Ford Mustang Transmission Clutch Kit 8 Cyl 4.6L Mcleod

Street Pro: Kit:1986-98 Mustang GT:1993-98 Cobra:10.5" x 1-1/16x10
Street Pro: Kit:1986-98 Mustang GT:1993-98 Cobra:10.5" x 1-1/16x10
Product Attributes:
- Pilot Bushing Material: Bronze Oilite
- Pressure Plate Style: Diaphragm
- Application: 1986-98 Mustang
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: Yes
- Horsepower Rating: 400
- Make: Ford
- Number of Discs: Single
- Disc Diameter: 10.5in.
- Spline: 1-1/16 X 10
- Throwout Bearing Included: Yes
- Flywheel Included: No
Features:
- McLeod Racing offers 4 levels of single disc clutches based on power and torque needs. The Street Level, Street Pro, Super Street Pro & the Street Extreme.
The Street Pro is the perfect choice for an entry level performance clutch for the street. We recommend it for cars up to 400hp (depending on part number) with mild engine mods and street tires. Included is a high clamp load pressure plate, an organic disc for smooth and even engagement with increased holding power over stock. Our kits are complete with Pressure Plate, Disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool. If you are looking for a clutch that's a great step up from your stock set up, the McLeod Street Pro is the clutch for you.

Additional Fitment Information:

Vehicle	Block	CC	Transmission	Engine	Sub Model	CID
1998 - Ford Mustang	V	-	Manual	8 Cyl 4.6L	SVT Cobra	281

1 In Stock

$423.06 CAD

$507.67 CAD

Brand	Mcleod
Part #	M9875105
Condition	New
Warehouse	B

1998 Ford Mustang Transmission Clutch Kit 8 Cyl 4.6L Ram

Powergrip clutch set
10.5 x 1 1/16-10 Spline
Powergrip clutch set 4.6L/5.0L 1986-00 Ford Mustang 10.5 Diaphragm 1 1/16-10
Powergrip Clutch Set
Features:
- Effectively Increase The Clutch Capacity To The 550 HP Level
- 8 Spring Hub Is Equipped w/Ram Polycoil Damper Springs
- 900/300 Series Friction Material Has Great Drivability
- Meets SFI Specifications
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
As power levels move up to and beyond 500 horsepower. RAM POWERGRIP meets the challenge with a combination of organic and metallic disc friction surfaces that effectively increase the clutch capacity to the 550 horsepower level. The 8-spring hub is equipped with RAM POLYCOIL damper springs encapsulated in polyurethane. This spring can handle three times the shock load of just the coil spring, and is standard in all RAM competition discs. The RAM Competition pressure plate in this kit provides 30% more clamp pressure than stock, and meets SFI specifications. At this high level of performance RAM POWERGRIP provides surprisingly good driving characteristics with smooth, comfortable driver control. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
1998 - Ford Mustang	V	-	8 Cyl 4.6L	GT	281

1 In Stock

$580.87 CAD

$697.04 CAD

Brand	Ram
Part #	R3698794
Condition	New
Warehouse	B

1998 Ford Mustang Transmission Clutch Kit 8 Cyl 4.6L Ram

Powergrip clutch set
10.5 x 1 1/8-26 Spline
Powergrip clutch set 4.6L/5.0L 1986-00 Ford Mustang 10.5 Diaphragm 1 1/8-26
Powergrip Clutch Set
Features:
- Effectively Increase The Clutch Capacity To The 550 HP Level
- 8 Spring Hub Is Equipped w/Ram Polycoil Damper Springs
- 900/300 Series Friction Material Has Great Drivability
- Meets SFI Specifications
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
As power levels move up to and beyond 500 horsepower. RAM POWERGRIP meets the challenge with a combination of organic and metallic disc friction surfaces that effectively increase the clutch capacity to the 550 horsepower level. The 8-spring hub is equipped with RAM POLYCOIL damper springs encapsulated in polyurethane. This spring can handle three times the shock load of just the coil spring, and is standard in all RAM competition discs. The RAM Competition pressure plate in this kit provides 30% more clamp pressure than stock, and meets SFI specifications. At this high level of performance RAM POWERGRIP provides surprisingly good driving characteristics with smooth, comfortable driver control. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
1998 - Ford Mustang	V	-	8 Cyl 4.6L	GT	281

1 In Stock

$596.12 CAD

$715.34 CAD

Brand	Ram
Part #	R3698794T
Condition	New
Warehouse	B

1998 Ford Mustang Transmission Clutch Kit 8 Cyl 4.6L Ram

Powergrip HD Clutch set
10.5 x 1 1/8-26 Spline
Powergrip HD clutch set 4.6L/5.0L 1986-00 Ford Mustang 10.5 Diaphragm 1 1/8-26
Powergrip HD Clutch Set
Features:
- True Strip/Street Competition Clutch System To The 650 HP Level
- 8 Spring Hum Is Equipped w/Ram Polycoil Damper Springs
- Sintered metallic Friction Material
- For Vehicles That See Frequent Track Duty
- Meets SFI Specifications
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
POWERGRIP HD is a true "strip/street" competition clutch system that can handle the rigors of weekend racing and spirited street driving. This system has the same components as standard POWERGRIP above with the exception that the disc friction surfaces are both sintered iron. Sintered iron provides a degree of slippage on vehicle launch to prevent the violent and uncontrollable engagement characteristics of paddle type metallic discs. This firm consistent engagement is easy to control. Some chatter is likely on engagement with rear gearing less than 3.73 in street applications. Each set includes the pressure plate, clutch disc, release bearing, and alignment tool unless otherwise noted. Use Powergrip HD for power levels to 650 horsepower, or lower powered vehicles that see frequent track duty.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
1998 - Ford Mustang	V	-	8 Cyl 4.6L	SVT Cobra	281

1 In Stock

$688.07 CAD

$825.68 CAD

Brand	Ram
Part #	R3698794HDT
Condition	New
Warehouse	B

1998 Ford Mustang Transmission Clutch Kit 8 Cyl 4.6L Ram

10.5 x 1 1/16-10 Spline
Replacement clutch set 4.6L/5.0L 1986-00 Ford Mustang 10.5 Diaphragm 1 1/16-10
Replacement Clutch Set
Features:
- Replacement Clutch Set
- OEM Quality Replacement Components
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
1998 - Ford Mustang	V	-	8 Cyl 4.6L	SVT Cobra	281

1 In Stock

$335.60 CAD

$402.72 CAD

Brand	Ram
Part #	R3688794
Condition	New
Warehouse	B

1998 Ford Mustang Transmission Clutch Kit 8 Cyl 4.6L Mcleod

Street Extreme:Kit:1986-98 Mustang GT:1993-98 Cobra:10.5" x 1-1/8x26
Street Extreme:Kit:1986-98 Mustang GT:1993-98 Cobra:10.5" x 1-1/8x26
Product Attributes:
- Pilot Bushing Material: Bronze Oilite
- Pressure Plate Style: Diaphragm
- Application: 1986-98 Mustang
- Alignment Tool Included: Yes
- Disc Material: Ceramic/ceramic
- Pilot Bushing Included: Yes
- Horsepower Rating: 600
- Make: Ford
- Number of Discs: Single
- Disc Diameter: 10.5in.
- Spline: 1-1/8 X 26
- Throwout Bearing Included: Yes
- Flywheel Included: No
Features:
- McLeod Racing offers 4 levels of single disc clutches based on power and torque needs. The Street Level, Street Pro, Super Street Pro & the Street Extreme.
The Street Extreme clutch kit is ideal for both the street and the track. We recommend it for cars up to 700 crank Hp/Tq (depending on part number) with moderate engine mods and street tires. The kit is SFI approved. Included is a high clamp load pressure plate, a dual face ceramic disc for smooth engagement and awesome holding power. Our kits are complete with Pressure Plate, Disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool.